Posts Tagged ‘Woodinville’

Heating System Preventative Maintenance: A Guide from a Sultan Furnace Contractor

Monday, November 28th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Sultan home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

4 Ways to Improve IAQ and Reduce Air Pollution in Poulsbo

Wednesday, October 12th, 2011

Your Poulsbo home might be a haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the four listed below:

  1. HEPA Filtration – Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In – Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps – Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Cut the Chemicals – There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

What Is the Single Biggest Money-Saver Upgrade You Can Make? A Question From Carnation

Monday, September 12th, 2011

While it would be great if there was a simple answer to this question, the real right answer depends to a great extent on your own particular situation in your Carnation home. There are literally dozens of steps you can take to save on your home heating and cooling costs, and which ones are most appropriate for you will have a lot to do with what you already have, how you use it and where you live.

For instance, if you have a well-insulated house but your HVAC system is more than 10 or 15 years old, investing in a new system will almost certainly save you a ton in the long run. Even if your existing system is working well, the newer systems available are simply so much more energy efficient that having one will cut your monthly bills dramatically.

Plus, you will be replacing your system relatively soon anyway if it is that old, so you might as well start saving now on your heating and cooling costs. However, even the best heating and cooling system on the market will not save you that much money if you do not have a properly insulated and sealed house.

If you have both good insulation and an energy efficient HVAC system, your thermostat might be the place to look when you want to try and cut your energy costs. A programmable or wireless thermostat might be just the ticket you need to cut back even more on your energy bills because of the added control it gives you to more precisely regulate the temperature inside your home.

Warning Signs: When to Call for an Air Conditioning Service in Woodinville

Wednesday, August 31st, 2011

The last thing you want is to be without an air conditioner during the hottest days of the year, espeically in Woodinville. Ideally you would never have to call for service to repair your air conditioning system, but just like anything else, your air conditioner will break down once in a while. However, you can dramatically reduce the inconvenience and cost of emergency air conditioning repairs if you are able to spot the warning signs of a problem before it shuts down your system completely.

For instance, all air conditioners make noise, but if your air conditioning system is suddenly making much more noise than it used to, chances are that something in there is not working properly. Calling for repairs when you notice this sudden increase in noise from your system will greatly increase the chances that the repair will be relatively minor and that you will not have to go without air conditioning when you need it most.

Also, it is a good idea to call for service if your air conditioning system does not seem to be doing as good a job as it used to when it comes to cooling your home evenly and effectively. Uneven cooling is a good sign that something is not working right within your system. And even if your air conditioner continues to work, it will probably be using up more energy than necessary for a less than ideal end result.

Along these same lines, a noticeable increase in humidity in all or part of your home is another good indication that something is wrong with your air conditioning system. Air conditioners both cool and dehumidify the air, so if yours stops removing humidity properly, you need to find out why.

In fact, even if you do not notice any difference in the way that your air conditioner is performing, you can still spot a problem if you keep a close eye on your energy bill. If you see a sudden increase in the amount of your bill because of the amount of energy that your air conditioning system is using, it is a good sign that something is not working right.

It may be tempting to put off calling for repairs, particularly if your air conditioner is still able to keep your house comfortable. However, it will likely be much cheaper and more convenient to have the repairs done early rather than waiting until the unit breaks down entirely.

Energy Efficient Home Cooling Tips From Lake Stevens

Wednesday, August 24th, 2011

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less in Lake Stevens. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough inspection and maintenance of your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come.

Changes in Light Bulb Laws and Technology

Friday, April 1st, 2011

In 2007, Congress passed the Energy Independence and Security Act, which promoted many forms of renewable energy and energy conservation. Its provisions include changes to the minimum standards for light bulb efficiency. Although the new standards haven’t officially gone into effect yet, you many already have seen changes in the kinds of light bulbs on sale in your local hardware store.

According to the law, starting in 2012, most standard general-purpose bulbs must be 30% more energy efficient than current incandescent bulbs. The new requirements will be phased in gradually, but the net result will be that by 2014, most of today’s incandescent bulbs will no longer be available for sale, and will be replaced by compact florescent light bulbs, or CFLs.

Of course, higher-efficiency bulbs are good for the environment. Moving to more efficient lighting is one of the easiest, lowest-cost ways for the U.S. to reduce electricity use and carbon emissions. But the changes will also benefit consumers – some estimates suggest that the average household’s utility bill will be reduced by as much as 12%. Even though CFLs cost more to buy ($3 compared to 50 cents for an incandescent), they use about 75% less energy and last five years instead of a few months. Depending on the cost of electricity, a homeowner that invests $90 to change 30 bulbs to CFLs will save between $440 and $1500 over the five-year life of the bulbs.

CFLs do have their detractors. Many claim that they don’t last anywhere near as long as the five years claimed by manufacturers – and this can in fact be the case you turn the bulbs on and off frequently. Energy Star recommends that all CFLs be left on for at least 15 minutes at a time. (Also, if you are using the bulbs in a dimmer, make sure that you buy bulbs specifically marked “dimmable”.) If you buy Energy Star bulbs, they come with a two-year warranty, so save your receipts and contact the bulb’s manufacturer if it burns out prematurely.

Others dislike the white – sometimes called “harsh” – light of CFLs. This effect can be mitigated by buying cooler-burning CFLs. Bulbs with Kelvin temperatures in the range of 2,700 to 3,000 emit a warmer light than higher-temperature bulbs with Kelvin temperatures of 5,000 or higher, which tend to have a white or bluish light.

Still other critics point out that CFLs contain mercury. While this is true, incandescent bulbs are not mercury-free in practice either. The increased power used for incandescent likely comes from coal-powered plants that produce mercury and many other types of pollution.

If you do break a CFL in your home, consult the EPA’s website for instructions on how to clean it up safely. http://www.epa.gov/cfl/cflcleanup.html

Of course, manufacturers are preparing for 2012 by developing new kinds of light bulbs that meet the more stringent standards, including high-efficiency incandescent and LED bulbs, so look for these options to arrive in stores over the next year or so.

The good news? A much less-beloved light bulb has already been phased out. The T-12 fluorescent tube – those humming, flickering office lights that give everyone’s skin a miserable greenish cast – has been replaced by T-8 fluorescent tubes, which are quieter, more efficient, don’t flicker, and make colors look much more natural.

How Does a Heat Pump Work?

Wednesday, January 5th, 2011

If you’re in the market for a new home heating and cooling system, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at.

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.
For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.