Posts Tagged ‘Heat Pump Repair’

Burlington Heat Pump Repair Pointers: Common Heat Pump Performance Problems

Friday, January 13th, 2012

The heat pump in your Burlington home needs to work year round to provide heat and air conditioning. This is why you want to make sure it’s performing as efficiently as possible to save on energy costs and prevent break downs. You should schedule an annual maintenance check-up and inspection with a certified HVAC technician to test the efficiency levels.

However, there are a few common causes of performance issues to be aware of so that you can be sure your heat pump performs at optimal levels. Call Bob’s Heating if you have questions about heat pump performance issues, or to make an appointment for an annual inspection and professional cleaning.

Airflow Issues

There should always be a certain amount of airflow (measured in cubic feet per minute) in your heat pump to maintain proper efficiency levels. If the airflow is less than 350 cfm per ton, it could increase your energy costs. You should make sure your HVAC contractor checks the airflow whenever your heat pump is inspected. Always keep the coils clean. Sometimes the ducts are not the right size, or the fan speed needs to be increased, but often cleaning the coils will help airflow, which is why it is important to maintain the components of your heat pump.

Air Leaks in the Duct System

Inefficient or poorly-designed duct systems may not distribute air properly throughout your home because of potential air leaks. There should always be a balance between the intake and return air in a forced air system, which helps maintain a neutral pressure within the house and increase efficiency. Some contractors argue over how tightly a house should be sealed for this reason, but if your heat pump is losing heat through leaks in the air ducts, this will greatly affect its efficiency.

Improper Refrigerant

Refrigerant leaks are another common cause of low performance levels in heat pumps. Most heat pumps already have refrigerant when they leave the factory and shouldn’t have any issues. Heat pumps that are charged with refrigerant when they are installed can sometimes have the wrong amount of refrigerant. Either too much or too little refrigerant will lower the heat pump’s efficiency and performance levels. Always check the recommended refrigerant amount or ask an HVAC technician before you add refrigerant yourself.

If the heat pump in your Burlington home isn’t working properly, it is also affecting your heating bills. Call Bob’s Heating to set up an appointment.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Tacoma Heat Pump Repair: Blowing Cold Air in Heat Mode

Friday, January 6th, 2012

One of the most impressive things about a heat pump is that it can both cool and heat your Tacoma home. But, if something goes wrong and your heat pump is suddenly trying to cool your home in the middle of the winter, you have a problem. Here are some possible causes of the issue and what you can do about them.

Defective Reversing Valve

The reversing valve is responsible for changing the flow of refrigerant between seasons so your heat pump can both heat and cool your home. So, if it breaks, you can imagine what happens next – you won’t switch into heating mode and your heat pump will try to air condition your home.

Defective reversing valves are hard to diagnose because the symptoms are largely the same as those of a defective compressor or condenser valve. However, because of how they are installed and where they are located, you will need a Tacoma heating contractor to inspect this problem no matter what.

Low on Refrigerant

Your heat pump should never run low on refrigerant because it should not leak, but if it does and the refrigerant gets low or if your device is simply very old, this may be a problem. Low refrigerant means that the device cannot transfer enough heat between the outdoor air and the inside air and the air that gets blown through your ducts by the air handler is not heated as much as is necessary to warm your house.

The problem is relatively easy to fix, though you should also have your repairman check for leaks and a possible cause of the refrigerant being low in the first place.

Not Running at All

The final problem is one you should be able to notice quite easily. If the heat pump is nor working at all but the air handler and blower are working fine, then the device will simply blow cold air from outside or possibly even just recycled cold air from inside. In either case, the heat pump is not running to heat the air and therefore, you’re getting whatever temperature it is outside.

This can be caused by a number of problems so it’s important to call for a Tacoma professional to inspect it immediately.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Edmonds Heating Contractor Guide: Troubleshooting Your Heat Pump Problem

Friday, December 9th, 2011

If your Edmonds heat pump is not working properly, there are a number of things that might be wrong. But, where do you start and how do you solve these problems quickly and inexpensively? Here are some tips for common heat pump problems.

Low Air Flow

Your heat pump is designed to provide steady air flow to the entire house. When it was originally installed, the technician sized it to do so. If it suddenly stops providing enough air flow to your entire house or if the air flow it provides isn’t as comfortable as you’re used to, something is probably wrong.

More specifically, there is likely an issue with the heat pump itself since the device will compensate for most external problems by running longer and harder. A quick inspection will often rule out serious problems, so you should have someone inspect your device as soon as you notice a problem.

Leaky Duct

If there is an external problem, such as leaky ductwork, it tends not to be as noticeable right away. Often, when ducts are leaking, air flow problems will occur only in certain rooms of your home. Even then, the heat pump might be able to maintain the right temperature in those rooms – you’ll just have a higher energy bill because of the energy loss in the ductwork.

The best way to determine what is happening and how best to tackle the problem is to have someone test your ductwork for leaks, a relatively quick process.

High Energy Bill

If your energy bill suddenly increases dramatically, it is usually due to energy loss somewhere in the transfer between the heat pump and the rooms of your home. Leaky ducts can be the culprit, but so too can the air handler or the heat pump itself. If you notice a sudden increase in your energy bill, look for other symptoms like uneven heating or cooling in certain parts of your home or noises coming from the ductwork or your air handler.

No matter what other symptoms accompany the increase, you probably need repairs. Your home may still be comfortable now, but the heat pump can only make up for the problem for so long and in the interim, it is being put under excessive stress that reduces its lifespan.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Is Your Heat Pump Malfunctioning? A Tip from North Bend

Friday, December 2nd, 2011

In a perfect world, you would never have to worry about things like malfunctions or repairs in North Bend. Everything would just work without ever needing to be maintained or fixed, and you could spend your time on energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a professional.

Tags: , , ,
Posted in Heat Pumps | Comments Off

Common Heat Pump Problems: Some Pointers from Bremerton

Wednesday, November 2nd, 2011

Heat pumps are great pieces of machinery for your Bremerton home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a professional repair person is you experience any issues with your heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off